PRODUCTS:
SEAMLESS PIPES (DIN 2448):
QUALITY: st 37.0, st 44.00, st 52.0
DIMENSION: from Fex 10.00 mm to Fex 420.00 mm
WELDED TUBES – HOLLOW SECTIONS:
ROUNDS: from 21.25×1.5 mm to 127.0×4.0 mm
SQUARES: from 17x17x1.0 mm to 400.0×400.0x10.0 mm
RECTANGULARS: from 40.0×20.0x1.0 mm to 400.0×200.0x10.0 mm
COMMERCIAL STEEL :
EQUAL CORNERS: from 20÷3 mm to 200÷16 mm
UNEQUAL CORNERS: from 40x20x3 mm to 250x90x16 mm
BARS: from 12×3 mm to 4000×40 mm
TEES: from 20x20x3 mm to 100x100x20 mm
SQUARES: from 8×8 mm to 150×150 mm
ROUNDS: from 6 mm to 200 mm
SECTIONS :
UPN: from 30 mm to 400 mm
IPN: from 80 mm to 500 mm
IPE: from 80 mm to 600 mm
HEA: from 100 mm to 1000 mm
HEB: from 100 mm to 1000 mm
- COILS & SHEETS:
HOT ROLLED/st37-2,st52-3
Thickness: from 1.5 mm to 12 mm
Width: 1.000mm/1250mm/1500mm
Length: 2.000mm/2500mm/3000mm
COLD ROLLED:
Thickness: from 0.4 mm to 3.0 mm
Width:1.000mm/1250mm/1500mm
Length:2.000mm/2500mm/3000mm
GALVANIZED:
Thickness: from 0.3 mm to 6.0 mm
Width: 1.000mm/1250mm/1500mm
Length: 2.000mm/2500mm/3000mm
Galvanize: from Ζ100 to Ζ350
DIAMONDS & TEARDROPS PLATES
Thickness: from. 2.0 mm to 10 mm
Width: 1.000mm/1250mm/1500mm
Length: 2.000mm/2500mm/3000mm
CORRUGATED TRAPEZOIDAL
Thickness: from 0.3 mm to 1.25 mm
Width: from 800mm to 1000mm
Length: from 2m to 6m
STAINLESS STEEL:
Thickness: from 0.4 mm to 6.0 mm
Width: 1.000mm/1250mm/1500mm
Length: 2.000mm/2500mm/3000mm
Quality: 304,316,430
Surface: glossy, matt, satin
THICK SHEETS
Thickness: from 5 mm to 100 mm
Width: from 800mm to 3000mm
Length: from 2m to 12m
Qualities: st37-2, st44-2, st52-3
PIERCED SHEETS
ROUND HOLES :
SQUARE HOLES :
OVAL HOLES :
RECTANGULAR HOLES :
